Skip to products
Interior view of a kitchen featuring Cotswold Blend stone cladding wall, modern furniture, and a wood-burning stove.

Handmade stone cladding · Made in England

Stone cladding, stone slips and stone veneer

Hand-finished stone slips and realistic stone veneer for fireplaces, feature walls, entrances and suitable exterior projects. Order samples, compare full-box prices and calculate 0.8m² boxes.

Shop stone cladding Open stone calculator
  • Handmade in the South of England
  • Samples available across the stone range
  • Exclusive stone finishes and matching corners

Shop every finish

Stone cladding, stone slips and stone veneer.

Browse the complete stone cladding collection below. Every card displays the full-box price for 0.8m² of stone slips, helping you compare warm Cotswold-inspired, buff, weathered and contemporary stone veneer finishes without mistaking a sample price for the cost of a full box.

UK handmadeMade and hand-finished in the South of England
Order samplesCompare stone colours and relief in your own light
0.8m² calculatorEstimate stone boxes, corner packs and wastage
Expert supportHelp choosing, measuring, ordering and installing

Plan before you order

Measure accurately. Fit with confidence.

Enter your wall measurements for a quick stone cladding estimate based on 0.8m² coverage per box. Add external corner length separately and allow for cuts before placing the final order.

Stone cladding

Stone cladding calculator

Estimate full stone boxes at 0.8m² per box, plus external corner packs at one pack per linear metre.

Order area10.56m² Stone boxes14 Corner packs0

This is a buying guide. Confirm the selected product's stated coverage and installation requirements before ordering.

Open the complete stone cladding calculator
Installing stone claddingNatural layouts, mixed sizes, corners, fixing and pointing Stone installation accessoriesPrimer, adhesive, spacers, pointing mortar and preparation products

Hand-finished stone character

Stone cladding with texture and variation that do not look mass-produced

Our pre-cast stone cladding is made and hand-finished in the South of England. Moulded faces reproduce natural surface detail, while layered colour gives individual pieces tonal movement and depth. Mixing several boxes during installation distributes those shapes and tones naturally across the completed wall.

The stone range is designed for convincing fireplaces, chimney breasts, feature walls, entrances, selected exterior elevations and commercial interiors. Start with samples, view them vertically in the intended light and use matching corner packs wherever the stone wraps around a visible return.

Explore stone finishes Read the installation guide
Stone box coverage

Each full stone box is calculated at 0.8m² on this page. Divide the order area by 0.8, round up to full boxes and include a sensible allowance for cutting and selection.

Estimate a stone cladding project
External corner packs

Measure chimney breasts, pillars, openings and visible returns in linear metres. The quick guide estimates one corner pack per linear metre and rounds up to complete packs.

Plan the stone installation

In-depth buyer's guide

Stone cladding, stone slips and stone veneer buying guide.

Learn how to compare stone veneer finishes, calculate 0.8m² boxes, plan external corners and install individual stone slips for interior and suitable exterior projects.

Stone cladding is an effective way to introduce the colour, shadow and texture of a traditional stone wall without building in full-depth masonry. The terms stone cladding, stone slips and stone veneer are often used for closely related products: comparatively slim stone-faced pieces fixed to a properly prepared background. Individual slips create varied joints and authentic relief, making them suitable for feature walls, fireplace surrounds, chimney breasts, entrances, garden rooms and selected exterior elevations.

This collection brings the products, full-box prices and planning information together in one place. Browse every stone finish directly after the hero, select a product to view samples and matching corners, and use the 0.8m² calculator to estimate the number of full boxes required. The guide below answers the practical questions customers commonly ask when searching for stone wall cladding, stone veneer and realistic stone slips in the UK.

01

What are stone cladding, stone slips and stone veneer?

Stone cladding is a decorative facing that creates the appearance and texture of a substantial stone wall without constructing full-depth masonry. Stone slips are the individual, reduced-depth pieces used to form that facing. Stone veneer is a broader name for the same kind of thin decorative stone surface. Product construction varies, so always check the specification, but all three search terms commonly describe a wall finish designed to give real texture, shadow and stone character.

Our collection uses pre-cast, hand-finished stone slips rather than a flat printed sheet. Moulded faces, varied sizes and layered colour help the installed stone veneer avoid an obvious repeating pattern. The most convincing result comes from opening several boxes, blending tones across the wall, maintaining considered joints and using matching corner pieces wherever the stone cladding wraps around a visible external edge.

02

Interior and exterior stone cladding applications

Interior stone cladding can give a living room, staircase, entrance, kitchen or commercial space a stronger architectural focal point. Stone veneer is especially effective on fireplace and chimney-breast projects because the changing face depth catches natural and artificial light. Plan sockets, shelving, lighting and television brackets before installation because the finished stone slips project further from the wall than paint or conventional wallpaper.

Exterior stone cladding must manage rain, frost, thermal movement and water around openings, copings, sills and the base of the wall. Confirm that the chosen stone slips, substrate, primer, adhesive and pointing mortar are suitable for the exact exposure. Higher elevations, insulated systems and unfamiliar backgrounds may require project-specific technical advice rather than relying on a general interior stone veneer method.

03

Choosing stone veneer colour, texture and samples

Stone cladding changes noticeably with light direction, joint colour and surrounding materials. Warm buff and Cotswold-inspired stone slips can soften modern interiors, while weathered or darker stone veneer creates stronger contrast. Face relief matters too: deeper pieces cast more shadow and produce a heavier, more traditional appearance, particularly beneath directional wall lights or around a fireplace.

Order samples before committing to full boxes. View them vertically in daylight and artificial light beside flooring, paint, timber, metalwork and the proposed pointing colour. A sample helps assess the face and tone, while project photography shows how varied stone slips work together across a larger wall. Variation is intentional, so boxes should be blended during installation rather than matched piece by piece.

04

Calculating 0.8m² stone boxes and corner packs

Measure each flat wall section in metres and multiply width by height. Add the separate wall areas, subtract large openings and then include a cutting allowance. This page estimates one full stone box for every 0.8m² of order area and rounds up to complete boxes. A simple wall commonly uses a 10% allowance, while multiple openings, returns and difficult cuts may justify more.

Measure exposed external edges separately in linear metres. Chimney-breast fronts, pillars, reveals and outside returns normally use matching corner packs so the stone profile continues around the edge. The quick calculator estimates one pack per linear metre. Always confirm the selected product's exact box and corner coverage before purchasing, particularly if its product specification differs from the collection guide.

05

Preparing and fitting stone slips and stone veneer

The background must be clean, sound, stable and able to support the total installed weight. Use the preparation, primer, adhesive and jointing system recommended for the substrate and location. Establish level reference lines, open several boxes and plan the blend before fixing. Where corner pieces control the layout, position those first and work back into the main wall.

Support each stone piece correctly in the adhesive and avoid repeating identical shapes in obvious rows. After the adhesive has cured, finish the joints consistently and clean the textured faces carefully. Protect surrounding surfaces and avoid aggressive acids, pressure or abrasive cleaning methods. Follow the complete installation guide and allow the specified curing time before exposing exterior work to severe weather.

Read the stone cladding installation guide
06

Planning the complete stone cladding wall system

A confident order includes more than the visible stone. Check the substrate, required primer, adhesive coverage, spacers or layout method, pointing mortar, cutting tools, corner packs, waste allowance and delivery access together. Heavy boxed materials also need a dry, protected storage position close to the work area.

Compare every stone cladding product through the collection, use the calculator to organise quantities and contact the project team if the wall includes unusual heat exposure, difficult access or exterior detailing. Planning the entire system before installation reduces delays and helps the finished wall retain a balanced mix of shapes, tones and joints.

Shop the complete stone cladding collection
07

Stone cladding for fireplaces and feature walls

A fireplace, media wall or chimney breast gives stone cladding a natural focal point. Individual stone slips can continue across a broad flat face and use matching corners around the returns, creating the impression of a deeper stone structure. Before fixing anything, confirm the appliance manufacturer's clearances, the permitted surface temperatures and the suitability of the backing board, adhesive and mortar for the complete build-up.

For feature walls away from direct heat, consider how the stone veneer will meet skirting, ceilings, sockets, shelving and adjoining painted surfaces. A planned edge looks more deliberate than an improvised finish. Lay several boxes out first, spread large and small pieces across the elevation and avoid concentrating one colour in a single area. This produces the balanced variation customers expect from high-quality stone wall cladding.

08

Buying stone cladding and stone slips in the UK

Compare products using the full-box price rather than the lowest sample price. Every product card on this page identifies the 0.8m² full-box variant so it is easier to compare finishes consistently. Then measure the wall, add an appropriate cutting allowance and account separately for matching corners, primer, adhesive, pointing mortar, tools and delivery access.

Stone cladding is heavy, so full orders are commonly delivered on a pallet and need a suitable unloading point. Store boxes dry and protected, keep the stone slips close to the work area and open several boxes before installation. If the project includes unusual substrates, significant heat, exposed exterior conditions or difficult access, contact the team before ordering your stone veneer system.

Compare all stone cladding products and full-box prices

Straight answers

What to know before your order arrives

These are the practical details that affect quantities, access and installation. For the complete terms, use the linked delivery and fitting pages.

Read delivery information
Are stone cladding, stone slips and stone veneer the same thing?

They are closely related terms. Stone cladding describes the completed decorative wall facing, stone slips are the individual reduced-depth pieces used to build it, and stone veneer is a broad name for a thin stone-effect facing. Always check the construction, dimensions and installation specification of the exact product.

Can I order stone cladding samples?

Yes. Open any product page and choose the sample option before adding it to the basket. Samples let you compare colour, texture and scale in the exact light where the material will be installed.

How much stone cladding should I order?

Measure every wall section, add a suitable cutting allowance and divide the order area by 0.8m². Round up to full boxes and measure visible external edges separately for corner packs. Confirm the exact product coverage before ordering.

How are full orders delivered?

Boxes and corners are normally delivered by pallet on a rigid vehicle with a tail lift and manual pallet truck. If the address has HGV, weight or unloading restrictions, contact the team before ordering so access can be checked.

Can stone cladding be used around a fireplace?

Stone cladding is a popular fireplace finish, but the complete installation must follow the appliance and product guidance. Use a suitable backing, adhesive and mortar system and maintain all required distances from the heat source.

What accessories will I need?

Most projects need a suitable primer, powder-based adhesive, spacers or layout guides, pointing mortar and the correct cutting tools. Browse the installation accessories before ordering so the stone wall can be prepared and completed without delays.

Shop stone cladding accessories

Where can I get help choosing a finish?

Use the stone product images and project pages for ideas, order several samples, or contact the project team for help comparing colours, quantities, corner packs and suitable installation products.

Contact the stone cladding team

Need a second opinion?

Talk through the finish, quantity or delivery before you buy.

Send the team your wall measurements, preferred stone colours and a photo of the project area. We can help with stone cladding samples, full boxes, corner packs, accessories and delivery planning.

Contact the stone team Send project details